After adjusting for smoke baffle flow adjustment in the ducts with
baffle rotation 90 ° in different positions within the mutation when,
through the different working flow, it has the flexible rotation, fine
adjustment wait advantage. To adjust the air shaft bearings, is equipped
with air in the external connector, seal air.
During user in selecting adjustment should be paid attention to when
being baffle the following items:
1 the baffle regulating draft specifications wide (W) or long L refers
to the edge of the draft framework within the edge in size. Width of
vertical shaft is baffle regulating baffle height throttle.in size, and
the leaf width (D), this series on the feet 450mm by inches.
2 to connect with the paddle and applications of the pipe size selection
throttle.in within two section size, as far as possible.
3 in the pipeline layout, applications should maintain baffle axis in a
horizontal position.
4 this series does not include the specification, according to the needs
of user, can undertake special design may baffle regulating should use
after ordering parameter. during
(A) the highest working pressure (P) mmH2O.
(B) the highest temperature (t) degrees Celsius.
(C) working medium. during
(D) in the pipeline of use and draft position.
